22 réponses à ce sujet

[mysha]

salut
je viens de reprendre diablo et je vois beaucoup de parti baal-bot, la façon de jouer de se bot ressemble énormément a d2jsp mais j'ai vue certain dire qu'il venais de d2fg
j'ai été voir sur le site mais je ne trouve rien
donc je voudrais savoir si qq'un pourrait me donner un lien pour télécharger se bot ainsi qu'un guide d'installation (français ou anglais)
et aussi je voudrais savoir si se bot est vraiment indétectable ?

merci

[Drks]

as_mika l'utilise mais je pense pas qu'il te le donnera :/

[mysha]

sa serait pas leechbot ??
celui la https://forum.gmstem...?showtopic=4253 ??

[Drks]

non , c'est pas un baalbot ça

[math58]

non , c'est pas un baalbot ça

si il peut fair baal en mettant des msg en fesant tp et tout...

[As_Moderateur]

awesom-O fait des baalrun en bot mais bcp trop déffectueux
quand a mon baalbot il s'appel kuk-bot
je ne peu pas te le donner car il est crypté specialement pour mon account
tu peu le buy sur ebay pour 25$
quasi rien a config juste account + pass et 2-3 pitit trucs tous simple.

[Sentenza56]

LOL et ta fait comment pour l'avoir toi mika ?
Tu la buy xD ?

[Drks]

oui car c'est un bot crypté pour marché qu'avec un acc :/

[As_Moderateur]

oui en faite je trade des items sur ebay et avec les sous je me suis payé le bot enfin 3 account bot ^^

[bg33]

Des liens pour télécharger le Kuk-bot v4.1 cracké.
Mis à jour le 21 Mars 2008

ATTENTION JE NE L'AI PAS TESTER, A UTILISER A VOS RISQUES ET PERILS

Programme:
Telecharger

Mise a jour du starter:
Telecharger

Liste de pickit optimisée:
Telecharger

Le manuel je suis en train de le traduire mais là je dois partir donc j'editerais mon post plus tard, en attendant le voilà en anglais.

Guide: Setup step by step for Kuk-Bot

1. Download the .Rar file you received in you E-mail from kuk and place it on your desktop.

2. Download winrar (www.winrar.com)

3. Rightclick on your .rar file from kuk and choose "Extract Here" and you will see a folder with ur account name on your desktop (Thats your Bot)

4. Open up the folder, and open Setup Instructions file by dobbeltclicking it.

And it looks like this:

Follow the following instructions steb by step.
Skipping one step, or not doing them in order may result in error(s).


1. open Kuk-Bot-V4.ini
2. Setup the following values:

NoBo_HPADD= All extra % to life gained from items. EX: Enigma gives 5% ("Increase Maximum Life 5%")

NoBo_MPADD= All extra % to mana gained from items. EX: SOJ gives 25% ("Increase Maximum Mana 25%")

Energy_Plus= (All the + energy points that items give you. All stats count too. EX: Anni gives 10-20, shako gives 2...) Then multiply that number by 1.5 and round it off.

Vita_Plus= (All the + vitality points that items give you. All stats count too. EX: Anni gives 10-20, shako gives 2, HOZ gives 20...) Then multiply that number by 3.

UseJuvAtNoMana=1 ;(1= use juv when there is no mana pot available, 0= do not use juv when there is no mana potion available)

Base_Life= Your total life without BO
Base_Mana= Your total mana without BO

//Chickening, in 1/1000th, so its like in %'s but 10x
Heal_Mana_MP=200
Heal_Mana_RP=-1
Heal_Mana_InstaChicken=-1
Heal_Life_HP=900
Heal_Life_RP=750
Heal_Life_InstaChicken=525
Visit_Malah_Mana=925
Visit_Malah_Life=925

//For the following two, leave the default.
Heal_NormalPotion_Timewait=4000
Heal_RP_Timeout_Retry=500

//The following three are the target belt potion counts. MP = mana potion, HP = healing potion, RP = rejuvination potion. Bot only uses super HP/MP and Full rejuvination potions.
Target_HP_Count=4
Target_MP_Count=4
Target_RP_Count=8

//Put 0 if you want some special debugging, but it should be 1 for normal botting.
LogRestrict=1

KillNihlathak= (1=kill,0=don't kill) Note that nihlathak is beta only, please do not use it yet.

KillBaal= (1=kill,0=don't kill)
BaalMessage= Any message.

Heal_Merc_HP= (% health below which a healing potion will be given to merc)
Heal_Merc_RP= (% health below which a rejuvination potion will be given to merc)
UseMerc= ( 1=use merc, 0=don't use merc)

TPSafeMSG= Any message (Which will be sent when the throne is clear, just before first wave), if you put zero there, no message will be written.

NGMSG= Any message (Which will be sent at the end of the game), if you put zero there, no message will be written.

3. Save the file (Kuk-Bot-V4.ini).
4. open Config.ini
5. Setup the following values:

D2PathName = (Path to your diablo 2 folder. EX: C:\Diablo II EX2: C:\Diablo II\ <- The EX2 would be wrong.)
D2Executable =Diablo II.exe //(I suggest using original diablo 2, and not the D2loader.)
Account = (Your diablo II account name)
Password = (Password for the above account)
CharSlot = (The slot at which your character is in logon screen.)
1 2
3 4
5 6
7 8

GameName = (Game name)
GamePassType = (Password type, 9 = public games, 1 = password is the same as game # EX: Kuk-Baal-234///234 , any number higher than one (except 9) will make random password at that length, any letters will make those letters to be the password.)

GameCreateDelay = (Extra delay in seconds when making a new game. Set this to some fairly high number if you only have one CDkey)

6. Save the file (Config.ini).
7. If you have more than one CDkey then follow the lettered steps:
A. Make sure that D2 is shut off.
B. Run "Make CDkeys.exe"
C. Put how many CDkeys you got.
D. Write the CDkeys there, and click next. Repeat this for every CDkey set.
~When you enter all CDkeys, wait for the program to make the files.
8. Character requirements and settings:

Hammer paladin is required.
A. Skills REQUIRED (Used by bot) are: 1. Blessed hammer, 2. Vigor, 3. Teleport, 4. Concentration, 5. Holy shield
B. TP book is required ( in inventory )
C. CTA is required.
I. On the CTA switch, the LEFT hand skill MUST be "Attack".
II. On the non-CTA switch, the LEFT hand skill MUST be "Blessed Hammer".
You must have the worldstone keep level 2 waypoint, and you must start out in ACT5!
You must be alive (no body on ground).

9. Open _Database folder, and open INV_LOCK.txt from it.
10. Set the INV_LOCK.txt the way you want. 1=don't stash that inventory slot, 0=stash that inventory slot.
11. Go back to Bot folder.
12. Run RedVex.exe
13. Press CTRL+O , Choose your logon server, and ports if needed (advanced users only). Then press OK.
14. Press CTRL+R , Realms window should appear, set the following:
Name = REALM
Address = localhost
Offset = 0

Press Add, then press OK
15. Press CTRL+S
16. Run D2, and make sure that you select the newly created realm (REALM). Login using that realm, and exit D2.
16. Run _[Kuk-Bot starter]_.exe to run the bot. Leave the computer and watch it go.



If you die, you have to set the wasdeadstatus in Kuk_Bot.ini to 0.
If you are unable to connect to battle.net once you stop the bot, then run the "Realm Back.exe".

Branka take No credit for this






KUK BOT BAAL GUIDE

There has been a lot of set up issues with KUK-BOT so hopefully this will explain it a little better for you. I am not the expert at this bot so take what you can out of it and feel free to correct/update me on any part.

All the following steps wil not matter if you do not have the following done.

Character requirements and settings:
Hammer paladin is required.
A. Skills REQUIRED (Used by bot) are: 1. Blessed hammer, 2. Vigor, 3. Teleport, 4. Concentration, 5. Holy shield
B. TP book is required ( in inventory )
C. CTA is required.
I. On the CTA switch, the LEFT hand skill MUST be "Attack".
II. On the non-CTA switch, the LEFT hand skill MUST be "Blessed Hammer".
You must have the worldstone keep level 2 waypoint, and you must start out in ACT5!
You must be alive (no body on ground).
No need to set skills hot keys, bot does it for you.
Try and 1024 x 768 32 bit screen for starters. I was told only this would work but I had different resolutions and it was okay but stick to the 32 bit. Also, turn off your screen savers. You can turn your monitor off while running.

Gear I use :

Enigma ( My idea )
HOZ (isted)
Shako (isted)
HOTO/HOZ
CTA/SPIRIT
ThunderGods Belt ( i feel this is crucial, souls don't scare me now )
Magefist ( Is there a good crafted glove for this? )
SOJ/ BK Ring
War Travelers
Mara's
Pally Torch
Annihilus ( I went for max resists if you have to choose )
As many +1 off or combat GC's as you can get while leaving 2 columns open for found items.

Merc:
Act 2 Nightmare Defensive
Eth Fortitude
Eth Andies ( with Ral for fire resists )
Insight ( For Mana )


1. The first part is the easiest and only took me two tries. Unrar the files to a folder of your choice and remember where as you will browse to them next.

2. The next two or three steps can be done in any order so do not worry if you miss one.

3. First I will add keys by clicking the MakeCDKeys application. With that this screen will pop up...

http://img526.images...8/cdkeysnt8.png

Where you see the highlighted 2 is where you will add the number of cdkey sets you wish to use. Why is this important? Well without going into much detail the idea is this. The bot can switch keys after "x" amount of runs therefore limiting possibilities of realmdown. Naturally the more the better but four should be fine for quick runs.

After you put in your figure and hit next you will see this screen..

http://img402.images...3/keyaddrf1.png

Here you will add your keys one set at a time, Classic on top, Expansion on the bottom. Then you hit next and repeat for the amount of keys you entered initially.

At this time it will use a mmbot function to create the keys. You will see the Refill Diablo Application open.

http://img503.images...1/refillxn6.png

Once this process completes for each set it will notifiy you the keys have been made. NOTE: This may overwrite some mpq's you currently have installed so you may want to rename your first 4 mpqs before doing this.

4. Now we move on the the config part. We will first open up the Config.ini file in the BOT folder. Here we will see this..

[Settings]
D2PathName =C:\Program Files\Diablo II ( Most should be this setting but verify your path to be sure )
D2Executable =Diablo II.exe ( Your startup exe in the Diablo II folder )
Account = ( The account that you sent to KUK for the Bot Script to be assigned to )
Password = Of above account
CharSlot =1 ( 1 being top left character after you log in to account )
GameName =Gamersvault_Baal- ( any name you choose typically followed by a - )
GamePassType =9 (for public games meaning no password) 1 ( for the password to be the same as the number sequnce of run ) or enter a consistant password of your choice.

CDkeyCount =2 ( This will change pending keys you configured, if not manually change it. )
LastCDkeyused =1 ( Leave this )
GameTimeout = 320000 ( Leave this )
D2WinName = Diablo II ( Leave This although you can change titles if you like just be sure to make those changes in other areas )
Paramaters = -w -lq -direct -txt -title "Diablo II" ( Your typical path though you may want to add to your own likings like -sleepy to use less resources. )
[Delays]
MenuMouseSpeed = 3
GameCreateDelay = 1 ( This I would change to 5 seconds minimum based on 4 keys )
MenuStaticDelay = 200

After your changes are made be sure to click File and Save before closing.

5. Now we want to be sure not to stash our static charms, anni and other pumps or we might get very dead. To do this
we need to open the _Database folder which is in the Bot Folder. Double click or right click edit the INV_LOCK file. The you will see rows of 0's and 1's. These rows represent your inventory and where you see the 1's is where the bot will NOT touch. Put your torch, anni and charms here. The 0's mean when that slot is full (of items according to your pickit ) the bot will stash those items in your stash.

6. Now go back to Bot folder. Run RedVex.exe and this will pop up...

http://img174.images.../redvex1wd6.png

It should show it loaded 1 plugin being KUK-BOT (V4x.x)

7. Press CTRL+O , Choose your logon server from the drop down and ports if needed (advanced users only). Then press OK.

http://img181.images.../redvex2xp8.png

8. Press CTRL+R , Realms window should appear..

http://img111.images.../redvex3rv9.png

set the following:
Name = REALM
Address = localhost
Offset = 0

Press Add, then press OK

9. Press CTRL+S and it should show that the Proxy thread has started.

http://img174.images.../redevx4jf8.png

10. Run D2, and make sure that you select the newly created realm (REALM) from the Realm drop downs. Login using that realm, and exit D2.

11. . Run _[Kuk-Bot starter]_.exe to run the bot. Leave the computer and watch it go.

Now, I did not get into some settings as far as Health and Mana nor even Chicken levels. I left to default and it seems fine. Just be sure to have no pots in belt, inventory or stash when you start. If you see it with a Greater Healing Potion while running just hit the hotkey to drink it. Do not click on it or you might I/C.

SPECIAL NOTES: If you die, you have to reset the wasdeadstatus in Kuk_Bot.ini to 0. It will show a 1 if you die.

The instructions suggest that if you are unable to connect to battle.net once you stop the bot, then run the "Realm Back.exe". I myself had to compile this from the source folder but i haven't needed it so hopefully you won't either.

The default pickit is not very desirable so you may want to grab another posted in these forums. The Pickit file is in the _Database folder.

I hope this coupled with others contributions will help get you up and running without losing much hair.

Here are some trouble shooting tips from Kukloprdos:

Q1: "Bot joins game and just stands there..."
You need to login through the realm which you made using redvex:
Run redvex.exe , press CTRL+S , start D2 and before you login select REALM as your gateway and then login. Close the D2 and run the bot starter and it should work. Redvex needs to be running while the bot is on.

Q2: "Bot stops at lobby..."
Open Kuk_Bot.ini and set wasdeadstatus to 0 and it should work.

Q3: "Weapon switching like crazy when it should BO!"
On your main weapon switch you need to have "Blessed Hammer" as your left hand skill, and on your CTA switch you need to have "Attack" as your left hand skill.

Q4: "Same CDkey always in use when playing normally WTF?"
Delete these two files "Diablo II\data\global\sfx\cursor\wavindx.wav" and "Diablo II\data\global\chars\am\cof\amblxbow.cof" and you should be good off.

Q5: "Shitload of potions get stashed!"
Try clearing the belt so that the bot deals with the potions the way it wants by default otherwise you need to set the target potion count in Kuk-Bot-V4.ini the way you want it.

Q6: "Proxy unable to bind..."
Run redvex.exe and go to options, there change Realm from 5000 to 5001 and try again. If that did not help then try setting it back and turn off your firewall. If that does not help then try turning off your antivirus program(s), norton antivirus does that for example.

Q7: "Im experiencing R/D and alot of checksum errors in my events.txt.."
Raise you CreateGameDelay to 30 and see how the bot runs, if it run perfect, then lower it slowly and see wich delay that fits you best.

Remerciement à Anka et Anon pour leurs guides.

[Drks]

Kuk bot est trop compliqué à config a mon humble avis ^^

Mika te dira si celui là marche car il a l'original

[bg33]

Mon lien est apparement déja configuré pour un hammerdin avec cta+enigma

Mais cta et enigma sont impératif donc pour les pauvres faudra vous le configurer.

[BlueDeamon]

Merci pour le partage

[As_Moderateur]

chez moi il fonctionne pas

[karimking]

attention

les version crack sont souvent infecté attendez que un membre l'aye test je vous conseil...

ont attend tous la reponse a mika

[As_Moderateur]

attention

les version crack sont souvent infecté attendez que un membre l'aye test je vous conseil...

ont attend tous la reponse a mika

ba j'ai beau le mettre chez moi il veux pas fonctionner je vais essayer de retirer le mien car il interfere peu etre ...

[karimking]

mais scan clean?

[As_Moderateur]

A-Squared Found nothing
AntiVir Found nothing
ArcaVir Found Trojan.Downloader.Autoit.E, Worm.Sohanad.B
Avast Found nothing
AVG Antivirus Found nothing
BitDefender Found nothing
ClamAV Found nothing
CPsecure Found W32.IM.W.Sohanad.G
Dr.Web Found Tool.Prockill
F-Prot Antivirus Found nothing
F-Secure Anti-Virus Found nothing
Fortinet Found nothing
Ikarus Found IM-Worm.Win32.Sohanad.ae, IM-Worm.Win32.Sohanad.cv
Kaspersky Anti-Virus Found nothing
NOD32 Found Win32/PrcView application
Norman Virus Control Found nothing
Panda Antivirus Found Application/Processor
Sophos Antivirus Found nothing
VirusBuster Found nothing
VBA32 Found nothing

[karimking]

hmm
je suis tenté
mais mika tu as test en enlevemt lautre?

[bg33]

Euh il trouve plein de truc ton scann la, ça m'effraie.

Dites moi, je reviens depuis janvier sur diablo, et j entend beaucoup parler de hack, comment les hackeurs hack t'il les comptes ?

Avec un keylogger sur les programmes de cheat ?
Ou avec des programmes qui teste tout les mot de passe du genre Zipcrackerz ? (mais le truc faut un processeur quad core sinon t en as pour 10ans sur un mot de passe compliqué)